C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

Configuring InputsTable 5-1: Input Dialog Box Fields, continuedBox Field DescriptionOutputsOther screensActivationtriggersoutputSupervisionerror triggersoutputConfigureEventsViewLinkagesClick this check box if you want this input, when itactivates, to trigger an output or output group. Enter thename of the output or group in the text box.Click this check box if you want an output or output groupto activate when the system detects a supervision error forthis input. Enter the output or group name in the text box.Click this button to configure this input to activate events.See “Input Events” on page 5-8 for more information.If this input is on a dialup panel, the events’ dialup settingdetermines when the panel dials the host and reportsactivities. See the C•CURE 800/8000 SoftwareConfiguration Guide for more information.NOTE: You can configure an input used as an RTE or aDSM to trigger an event if the door to which theinput is assigned has no readers.You can also assign a “supervision error” event toan input used as a DSM or RTE.Click this button to see the groups that contain this input.See “Viewing Input Linkages” on page 5-11 for moreinformation.C•CURE 800/8000 Hardware Configuration Guide 5–7