C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

Configuring Card FormatsTo Edit a Card Format1. Select a field in the Field list box on the Card Format dialog box and clickthe Modify button. The Update Format Field dialog box opens on top ofthe Card Format dialog box, as shown in Figure 4-17.Example:If you are editing the Facility code field, Facility code displays in theType box.Figure 4-17: Update Format Field Dialog Box2. Enter data according to the field/button information in Table 4-12 onpage 4-31 and the card format type information in Table 4-13 onpage 4-33.3. For Facility code, Site code, and Fixed data card types, enter a DataValue in the Data value field in the Field Data box and click Add to enterthe value in the Data drop-down box. To remove a data value from theData drop-down box, select the value and click Delete.NOTEThe Data value field and the Add and Delete buttons are available onlyfor the preceding three card types.4–30 C•CURE 800/8000 Hardware Configuration Guide