C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

ACM and ACM Ext Tabs for iSTAR Classic & iSTAR ProTable 1-6: ACM Ext Tab Fields, continuedBox Field/Button DescriptionOutput Boards R/8 #1 to #8 Choose the IR/8 - Output Module that you want to configure byclicking the appropriate check box and View button for theboard. The R/8 dialog box opens. See “R/8 - Output Modulesfor Controllers” on page 1-28 for information.Deselecting the R/8 check box in the Controller dialog box,deletes the R/8 Input Module.Readers Reader #1 to #8 Click the check box next to the reader that you want toconfigure. The system automatically configures the readerusing the values from the default reader definition. To view oredit the reader, click the reader’s View button. See“Configuring Readers” on page 4-2 for more information.The reader is downloaded to the controller when you click OKin the Controller dialog box.Deselecting the Reader check box in the Controller dialogbox, deletes the reader.Configuring I/8 - Input Modules for iSTARThe I/8 - Input Module provides additional inputs to the controller formonitoring security alarms. The I/8 - Input Module has Class-A supervisedinputs; 8 supervised alarm inputs for controllers. You can add up to 16 I/8 -Input Modules to a controller (eight per ACM).NOTEThe I/8 - Input Modules are connected to a reader bus port on the ACM.To Add I/8 - Input Modules1. In the 1st ACM Ext or 2nd ACM Ext tab in the Controller dialog box,choose the I/8 - Input Module you want by clicking the appropriate checkbox and View button for the board. The I/8 dialog box opens, shown inFigure 1-11 on page 1-27.1–26 C•CURE 800/8000 Hardware Configuration Guide