C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

Configuring Dialup Options for iSTAR ClustersTable 10-3: Dial Out Tab FieldsBox Field DescriptionHost modems whichcan contact thispanelHost modems/Remote phonenumbersAutomatically initiateconnection whenconfiguration changes after:hh:mmModifyDisplays the host modems and remote phone numbers thatthe host can use to contact this controller. Click the Modifybutton to edit the list.The host calls the modems in the order that they are listed inthis box. A modem/phone combination can be listed morethan once, but you cannot enter more than 4 modem/phonecombinations.Click this check box to specify that configuration changesmade to C•CURE 800/8000 from the Administrationapplication are automatically downloaded to the dialupcontroller within a specified time.Example:Cardholder additions and deletionsEnter the maximum time that the host waits after aconfiguration change to download configuration changes tothis dialup controller.Enter the time in hh:mm format.If the Automatically initiate connection whenconfiguration changes after: check box is not selected, thehh:mm field is unavailable.Changes that the controller does not need, such as changesto an object’s name or description, do not cause a downloadto the controller.Opens the Controller Dial Out Components dialog boxwhere you edit the list of host modems and phone numbersthat can call this controller. See “Selecting Host Modems forDial Out” on page 8-14 for more information.10–16 C•CURE 800/8000 Hardware Configuration Guide