C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

Configuring Card FormatsFigure 4-16: Add Format Field Dialog Box2. Enter data according to the field/button information in Table 4-12 onpage 4-31 and the card format type information in Table 4-13 onpage 4-33.3. Select a Start Position that is greater than 1 in the Edit Card Field box andchoose a Card Type from the Type drop-down list.4. For Facility code, Site code, and Fixed data card types, enter a DataValue in the Data value field in the Field Data box and click Add to enterthe value in the Data drop-down box. To remove a data value from theData drop-down box, select the value and click Delete.NOTEThe Data value field and the Add and Delete buttons are available onlyfor the preceding three card types.5. Click OK to process your entry. The Card Format dialog box reappearswith the new card format displayed in the Field list box.C•CURE 800/8000 Hardware Configuration Guide 4–29