C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

Primary Tab for iSTAR Classic & iSTAR ProPrimary Tab for iSTAR Classic & iSTAR ProConfiguring the Primary Communications PathThe Primary tab in the Cluster dialog box lets you configure a primarycommunications path for the cluster.To Configure the Primary Communications Path1. From the Cluster dialog box, click the Primary tab. The Primary tab opensfor the cluster, shown in Figure 1-20.Figure 1-20: Primary TabNOTEYou cannot select the method of communication between host andcontroller on the Primary tab if the cluster is online. To put the clusteroffline, deselect the Online check box in the Identification box, click OK toclose the dialog box, and then re-open the dialog box.2. Provide the information shown in Table 1-10 on page 1-46.C•CURE 800/8000 Hardware Configuration Guide 1–45