C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

I/8 — Input ModulesI/8 — Input ModulesThe I/8 - input module provides additional inputs to the panel for monitoringsecurity alarms. The I/8 - input module has Class-A supervised inputs;8 supervised alarm inputs for apCs, apC/8Xs, and apC/Ls. To configureI/8 - Input Modules on ACMs, see “Configuring I/8 - Input Modules foriSTAR” on page 1-26.NOTEThe I/8 - input modules cannot be connected to the WPSC. You mustconnect these boards to the reader bus port on the panel.To Add I/8 - Input Modules1. From the apC dialog box (apC/8X or apC/L dialog box), click the Add-onboards button. The Add-on Boards dialog box opens.2. In the Supervised input boards box, choose the I/8 - input module youwant by clicking the appropriate check box and View button for theboard. The I/8 dialog box opens, shown in Figure 6-14.Figure 6-14: I/8 Dialog BoxC•CURE 800/8000 Hardware Configuration Guide 6–17