C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

Configuring iSTAR Clusters for DialupFigure 10-4: Cluster Dialog Box3. In the Identification box, specify information for configuring the clusterand on the General tab assign controllers to the cluster. See “ConfiguringClusters for iSTAR Classic & iSTAR Pro” on page 1-40 for information.4. Click the Primary tab to configure a primary communications path for thecluster.- or -Click the Secondary tab to configure a secondary communications pathfor the cluster.Depending on the tab you chose, either the Primary tab or the Secondarytab opens, as shown in Figure 10-5 on page 10-10.C•CURE 800/8000 Hardware Configuration Guide 10–9