C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

Configuring Readers4. Provide the information shown in Table 4-1 on page 4-4 and thencontinue to Step 5 on page 4-6.Table 4-1: Reader Dialog Box FieldsBox Field DescriptionIdentification Name Displays the reader name as provided by the system. To changethe reader name, enter a unique name up to 50 characters long.DescriptionOnlineAfter Hours EnablingEnter a brief description of this reader. The text here is forinformational purposes only; it does not appear anywhere else.Click this check box if you want to put this reader online. Whilethe reader is online, the controller/apC tries to communicate withit.If checked, the configured reader can be used as an after hoursenabled reader. You will not be able to deselect this box until youhave deselected the After Hours Restrict Readers option in theReader Group dialog box found under the Configure menu. Seethe C•CURE 800/8000 Software Configuration Guide for moreinformation.Reader technologyClick the option button next to the type of card that this cardreader can accept. Possible values are Magnetic, Wiegand,Proximity, or RFID.4–4 C•CURE 800/8000 Hardware Configuration Guide