10.07.2015 Views

ARMY *TM 9-6115-464-34 AIR FORCE TO-35C2-3 ... - Igor Chudov

ARMY *TM 9-6115-464-34 AIR FORCE TO-35C2-3 ... - Igor Chudov

ARMY *TM 9-6115-464-34 AIR FORCE TO-35C2-3 ... - Igor Chudov

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>ARMY</strong> TM 9-<strong>6115</strong>-<strong>464</strong>-<strong>34</strong><strong>AIR</strong> <strong>FORCE</strong> <strong>TO</strong> <strong>35C2</strong>-3-445-2NAVY NAVFAC P-8-624-<strong>34</strong>d. Assembly.(1) Press drive gear (19, figure 3-31) onto shaft (20).(2) Insert shaft into pump body (22) and press gear (12) onto shaft until a dimension of 4.84375 ± 0.010inches is obtained between the mounting flange and the top of the drive flange (figure 3-32). Fortype 1 dimensions use 4.220 +/– .010M(3) Press shaft (21, figure 3-31) into pump body and install driven gear (18).(4) Install cover plate (17) and secure with Iockwashers (16 and 14) and screws (15 and 13).(5) Insert plunger (10) into valve body (11). Install spring (9) and retainer(8) and secure with roll pin (7).(6) Install new seal (6), Iockwasher (5) and pressure relief valve (4).(7) Check that drive shaft rotates freely. If shaft binds, disassemble pump and ascertain cause beforeinstalling.(8) Install pickup screen (3) and tighten.e. Installation.NOTEPickup screen must be in the horizontal position when the pump is installed in theengine.(1) Install oil pump, making sure that drive gear mates correctly with speed switch drive assembly.(2) Install oil pan (paragraph 3-37).3-79

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!