10.07.2015 Views

ARMY *TM 9-6115-464-34 AIR FORCE TO-35C2-3 ... - Igor Chudov

ARMY *TM 9-6115-464-34 AIR FORCE TO-35C2-3 ... - Igor Chudov

ARMY *TM 9-6115-464-34 AIR FORCE TO-35C2-3 ... - Igor Chudov

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

1. Screw2. Lockwasher3. Screw & captive washer assy4. Cover5. Locking nut6. Nut7. Tooth Iockwasher8. Potentiometer9. Nut10. Screw & captive washer assy11. Nut12. Screw & captive washer assy13. Wiring harness assy14. Nut15. Screw & captive washer assy16. Shorting plug17. Nut18. Screw & captive washer assy19. Protective cap assy20. Nut & captive washer assy21. Flat washer22. Screw23. Nut and captive washer assy24. DC relay assy25. Nut & captive washer assy26.27.28.29.30.31.32.33.<strong>34</strong>.35.36.37.38.39.40.41.42.43.44.45.46.47.48.49.50.<strong>ARMY</strong> TM 9-<strong>6115</strong>-<strong>464</strong>-<strong>34</strong><strong>AIR</strong> <strong>FORCE</strong> <strong>TO</strong> <strong>35C2</strong>-3-445-2NAVY NAVFAC P-8-624-<strong>34</strong>ScrewInstrument shuntNut captive washer assyScrewSpecial current transformerNutLockwasherScrewCranking relayNut & captive washer assyScrewTerminal board assyNutScrew & captive washer assyResistorResistor bracket assyNut & captive washer assyScrewTerminal board assyTerminal jumperChassisResistorBracket assynutScrew & captive washer assyFigure 3-119. Special Relay Assembly, Exploded View (Sheet 2 of 2)(18) If any dc relay assembly component must be replaced or encapsulating coating repaired or replaced,refer to Appendix A references for detailed procedures. Repair/replace encapsulating by applying a0.007 inch (min) coating of polyurethane resin (Scotchcast 221, Minnesota Mining and Mfg. Co. orequal).(19) Replace any damaged or defective parts.d. Assembly.(1) Install screw and captive washer assembly (50, figure 3-119), nut (49), bracket assembly (48) andresistor (47).(2) Install terminal jumper (45), terminal board assembly (44), screw (43) and nut & captive washerassembly (42).(3) Install resistor bracket assembly (41), resistor (40), screw & captive washer assembly (39), and nut(38).(4) Install terminal board assembly (37), screw (36), nut & captive washer assembly (35).(5) Install cranking relaly (<strong>34</strong>), screw (33), Iockwasher (32), and nut (31).(6) Install special current transformer (30), screw (29), nut & captive washer assembly (28).(7) Install instrument shunt (27), screw (26), nut & captive washer assembly (25).(8) Install dc relaly assembly (24), and nut & captive washer assembly (23).(9) Install screw (22), flat washer (21), and nut &captive washer assembly (20).(10) Install protective cap assembly (19), screw & captive washer assembly (18) and nut (17).(11) Install shorting plug (16), screw&captive washer assembly (15), and nut (14).(12) Install wiring harness assembly (13), screw &captive washer assembly (12), and nut (11).3-251

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!