10.07.2015 Views

ARMY *TM 9-6115-464-34 AIR FORCE TO-35C2-3 ... - Igor Chudov

ARMY *TM 9-6115-464-34 AIR FORCE TO-35C2-3 ... - Igor Chudov

ARMY *TM 9-6115-464-34 AIR FORCE TO-35C2-3 ... - Igor Chudov

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>ARMY</strong> TM 9-<strong>6115</strong>-<strong>464</strong>-<strong>34</strong><strong>AIR</strong> <strong>FORCE</strong> <strong>TO</strong> <strong>35C2</strong>-3-445-2NAVY NAVFAC P-8-624-<strong>34</strong>(4)(5)(6)(7)(8)(9)(10)Inspect mode selector switch for cracks, corrosion and other damage. Check switch continuity usingan ohmmeter.Inspect transformer for cracks, corrosion and burns or other evidence of shorting. Using anohmmeter, check transformer coils for continuity.Refer to the Operator and Unit Maintenance Manual for wiring harness cleaning, inspection, andrepair procedures.If the wiring harnesses have sustained damage and require repair or rebuild, refer to figures 5-15,5-16 or 5-17 as required, for layout, identification of material requirements and Appendix Areference for detailed soldering and replacement procedures.Inspect back plate and chassis for cracks, corrosion, warping and other damage.Check all hardware for crossed, stripped, and otherwise damaged threads.Replace all defective parts and parts damaged beyond repair.d. Assembly.(1) Install chassis (22, figure 5-14), transformer (21), screw & captive washer (20), and nut (19).(2) Install nut (18), mode selector switch (17), tooth Iockwasher (16) and nut (15).(3) Install load sensing module (14), and screw &captive washer (13).(4) Install protective cap (11).(5) Install screw & captive washer (10) and nut (9).(6) Install protective (8).(7) Position branched wiring harness (12) to install screw & captive washer assembly (7) and nut (6).(8) Install branced wiring harness (5), screw & captive washer assembly (4), and nut (3).(9) Install backup plate (2), screw and captive washer (1).e. Installation. Refer to the Operator and Unit Maintenance Manual for load bank control box assemblyinstallation procedures.5-37

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!