ARMY *TM 9-6115-464-34 AIR FORCE TO-35C2-3 ... - Igor Chudov

ARMY TM 9-6115-464-34AIR FORCE TO 35C2-3-445-2NAVY NAVFAC P-8-624-34CHAPTER 2GENERAL MAINTENANCE INSTRUCTIONSSection I. REPAIR PARTS, SPECIAL TOOLS, AND EQUIPMENT2-1. TOOLS AND SUPPORT EQUIPMENT.There are no special tools or support equipment required to perform any level of maintenance on generatorset Models MEP-004A, MEP-103A, and MEP-113A. Table 2-1 contains a list of recommended tools andsupport equipment normally required to maintain the generator sets at the (direct and general support) anddepot maintenance levels. References or illustrations indicating the need or use of these or similar tools areaslisted in the table.2-2. DIRECT SUPPORT, GENERAL SUPPORT, AND DEPOT MAINTENANCE REPAIR PARTS.Direct support, general support and depot maintenance repair parts are listed and illustrated in the, Unit,(Direct and General Support) and Depot Maintenance Repair Parts and Special Tools List).2-3. FABRICATED TOOLS AND EQUIPMENT.A breakdown cable is required to troubleshoot the electric governor system of MEP-113A. The breakoutcable is used to gain access to the Governor Control Unit’s MS3106R20-29 connector. Appendix B givesfabrication instructions for the breakout cable.Table 2-1. TOOLS AND SUPPORT EQUIPMENTReferenceItem FSN or Part No. Figure Para. UseTorch outfit, cutting 3433-00-357-6311 or 3-98 Removing extensively damagedand welding (Tool equal housing componentsSet L/W67706)Oscilloscope 6625-00-643-1740 or 3-92 Testing voltage regulatorsequalHoist, chain, 3 ton 3950-00–292-9879 or 2-12 2-6, 2-7 Removing and installing engineequaland generator assembliesTrestle, hoist, port– 3950-00-449-7005 or 2-2,2-3 2-6, 2-7 Removing and installing engineable, 5 ton equal and generator assembliesMultimeter, split 6625-00-892-1497 or 3-95 Testing resistance of generatorcore equal assembly windingsMultimeter, digital 6625-00-495-3513 3-65 Troubleshooting electric governorsystem (MEP-113A only).Ohmmeter 6625-00-643-1030 or 3-95 Testing continuity of generatorequalassembly componentsPuller attachment(component of 5120-00-711-6753 or 3-95 Removing generator bearingpuller kitequal5180-701-8046)Solder outfit, electric 3439-00-853-8760 or 3-95 Soldering electrical leads toequalgenerator assembly rectifiersTest stand, actuator 4940-00-152-2107 or 3-43 Testing performance of hydraulicequalactuator2-1