general information - Martin Nez

ENGINE 3-77OIL STRAINER• Install the O-ring.• Apply SUZUKI SUPER GREASE “A” to the O-ring. 99000-25010: SUZUKI SUPER GREASE “A”(or equivalent grease)Use new O-ring to prevent oil leakage.• Install the oil strainer 1 as shown and tighten the oil strainerbolts to the specified torque. Oil strainer bolt: 10 N·m (1.0 kgf-m)OIL PRESSURE REGULATOR• Apply SUZUKI SUPER GREASE “A” to the O-rings.• Press in the oil pipe 1 to the crankcase. 99000-25010: SUZUKI SUPER GREASE “A”(or equivalent grease)Use new O-ring to prevent oil leakage.• Apply SUZUKI SUPER GREASE “A” to the O-ring.• Press in the pipe 2 to the oil pan.• Install the oil pressure regulator case 3 and tighten the bolts4 to the specified torque. Oil pressure regulator case bolt 4: 10 N·m (1.0 kgf-m)OIL PRESSURE SWITCH• Apply SUZUKI BOND to the thread part of oil pressure switchand tighten oil pressure switch to the specified torque. 99000-31140: SUZUKI BOND “1207B” Oil pressure switch: 14 N·m (1.4 kgf-m)NOTE:Be careful not to apply SUZUKI BOND to the hole of thread end.