general information - Martin Nez

EXHAUST SYSTEM 6-5INSTALLATIONInstall the exhaust pipe and muffler in the revers order ofremoval. Pay attention to the following points:• Replace the exhaust pipe gaskets and muffler connectorswith new ones.NOTE:Be sure to face the tabs A on the exhaust pipe gaskets 1 to theengine side when installing them.• Tighten the exhaust pipe bolts, muffler mounting bolts andmuffler connecting bolts to the specified torque. Exhaust pipe bolt: 23 N·m (2.3 kgf-m)Muffler mounting bolt: 23 N·m (2.3 kgf-m)Muffler connecting bolt: 23 N·m (2.3 kgf-m)• Install the HO2 sensor 2. HO2 sensor: 48 N·m (4.8 kgf-m)