general information - Martin Nez

SERVICING INFORMATION 10-45FI SENSORS+ SECONDARY THROTTLE VALVE ACTUATORITEM SPECIFICATION NOTECMP sensor resistance0.9 – 1.7 k ΩCMP sensor peak voltage 0.7 V and more When crankingCKP sensor resistance142 – 194 ΩCKP sensor peak voltage 0.5 V and more When crankingIAP sensor input voltage4.5 – 5.5 VIAP sensor output voltageApprox. 2.7 V at idle speedTP sensor input voltage4.5 – 5.5 VTP sensor resistance Closed Approx. 1.1 kΩOpenedApprox. 4.4 kΩTP sensor output voltage Closed Approx. 1.1 VOpenedApprox. 4.4 VECT sensor input voltage4.5 – 5.5 VECT sensor resistance Approx. 2.45 kΩ at 20 °CIAT sensor input voltage4.5 – 5.5 VIAT sensor resistance Approx. 2.45 kΩ at 20 °CAP sensor input voltage4.5 – 5.5 VAP sensor output voltageApprox. 3.6 V at 760 mmHg (100 kPa)TO sensor resistance16.5 – 22.3 kΩTO sensor voltage Normal 0.4 – 1.4 VLeaning3.7 – 4.4 VWhenleaning 65°GP switch voltage 0.6 V and more From 1st to TopInjector voltageBattery voltageIgnition coil primary peak voltage 85 V and more When crankingSTP sensor input voltage4.5 – 5.5 VSTP sensor resistance Closed Approx. 0.6 kΩOpenedApprox. 4.5 kΩSTP sensor output voltage Closed Approx. 0.6 VOpenedApprox. 4.5 VSTV actuator resistanceApprox. 7 ΩPAIR control solenoid valve resistance18 – 22 Ω (at 20 °C – 30 °C)HO2 sensor output voltage0.4 V and less at idle speed0.6 V and more at 5 000 r/minHO2 sonsor resistance 4 – 5 Ω at 23 °C