general information - Martin Nez

3-86 ENGINENOTE:Hook the return spring end A to the stopper 5.• Check the gearshift cam stopper moves smoothly.• Locate the gearshift cam in the neutral position.• Install the gearshift cam stopper plate 6.NOTE:Align the gearshift cam pin B with the gearshift cam stopperplate hole C.• Apply a small quantity of THREAD LOCK to the gearshift camstopper plate bolt and tighten it to the specified torque. 99000-32050: THREAD LOCK “1342” Gearshift cam stopper plate bolt: 13 N·m (1.3 kgf-m)• Install the gearshift shaft assembly 7 and washer 8 asshown.NOTE:Pinch the gearshift arm stopper 9 with return spring ends D.• Install the washer 0 and snap ring A.