general information - Martin Nez

9-42 ELECTRICAL SYSTEMSERVICINGVisually inspect the surface of the battery container. If any signsof cracking or electrolyte leakage from the sides of the batteryhave occurred, replace the battery with a new one. If the batteryterminals are found to be coated with rust or an acidic whitepowdery substance, clean the battery terminals with sandpaper.RECHARGING OPERATION• Using the multi circuit tester, check the battery voltage. If thevoltage reading is the 12.0 V (DC) and less, recharge the batterywith a battery charger.A Charging periodB Stop charging* When recharging the battery, remove the batteryfrom the motorcycle.* Do not remove the caps on the battery top whilerecharging.Recharging time: 4 A for 1 hour or 0.9 A for 5 to 10 hoursBe careful not to permit the charging current toexceed 5 A at any time.• After recharging, wait for 30 minutes and more and check thebattery voltage with a multi circuit tester.• If the battery voltage is the 12.5 V and less, recharge the batteryagain.• If battery voltage is still 12.5 V and less, after recharging,replace the battery with a new one.• When the motorcycle is not used for a long period, check thebattery every 1 month to prevent the battery discharge.(V)1413121110(at 0 – 40 ˚C)100 75 50 25 0 (%)Battety charged condition