general information - Martin Nez

ENGINE 3-87OIL PUMP• Install the O-ring to the oil pump and apply SUZUKI SUPERGREASE “A” to it.Use new O-ring to prevent oil leakage.NOTE:Set the oil pump shaft end A to the water pump shaft. 99000-25010: SUZUKI SUPER GREASE “A”(or equivalent grease)• Install the oil pump with the oil pump mounting bolts and thentighten them to the specified torque. Oil pump mounting bolt: 10 N·m (1.0 kgf-m)• Install the washer 1 and pin 2.NOTE:Be careful not to drop the washer 1 and pin 2 into the crankcase.• Install the oil pump driven gear 3.• Install the snap ring 4.CLUTCH• Install the thrust washer onto the countershaft.NOTE:The chamfer side A of thrust washer faces inner side.