general information - Martin Nez

ENGINE 3-95• Pull the cam chain lightly.• The exhaust camshaft sprocket has an arrow marked “1” C.Turn the exhaust camshaft so that the arrow is aligned withthe gasket surface of the cylinder head.• Engage the cam chain with the exhaust camshaft sprocket.• Bind the cam chain and sprocket with a proper wire clamp 1to prevent the cam chain disengagement while installing thecamshaft journal holders.• The other arrow marked “2” D should now be pointing straightup. Starting from the roller pin that is directly above the arrowmarked “2” D, count out 12 roller pins (from the exhaust camshaftside going towards the intake camshaft side).• Engage the 12 roller pin E on the cam chain with the arrowmarked “3” on the intake sprocket.• Bind the cam chain and sprocket with a proper wire clamp 2to prevent the cam chain disengagement while installing thecamshaft journal holders.NOTE:The cam chain should now be on all three sprockets. Be carefulnot to move the crankshaft until the camshaft journal holdersand cam chain tension adjuster are secured.