10.07.2015 Views

general information - Martin Nez

general information - Martin Nez

general information - Martin Nez

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

4-88 FI SYSTEM DIAGNOSISECT SENSOR INSPECTIONThe engine coolant temperature sensor is installed at the cylinderhead. (4-47)ECT SENSOR REMOVAL AND INSTALLATION• Remove the ECT sensor. (7-7)• Install the ECT sensor in the reverse order of removal. ECT sensor: 18 N·m (1.8 kgf-m)IAT SENSOR INSPECTIONThe intake air temperature sensor is installed on the left side ofthe air cleaner box. (4-51)IAT SENSOR REMOVAL AND INSTALLATION• Lift and support the fuel tank. (5-3)• Remove the IAT sensor from the air cleaner box.• Install the IAT sensor in the reverse order of removal. IAT sensor: 18 N·m (1.8 kgf-m)AP SENSOR INSPECTIONThe AP sensor is located on the right frame. (4-55)AP SENSOR REMOVAL AND INSTALLATION• Lift and support the fuel tank. (5-3)• Remove the AP sensor from the frame.• Install the AP sensor in the reverse order of removal.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!