general information - Martin Nez

2-14 PERIODIC MAINTENANCEOIL FILTER REPLACEMENT• Drain the engine oil as described in the engine oil replacementprocedure.• Remove the oil filter 1 with the special tool. 09915-40610: Oil filter wrench• Apply engine oil lightly to the gasket of the new oil filter beforeinstallation.• Install the new oil filter. Turn it by hand until you feel that theoil filter gasket contacts the oil filter mounting surface. Then,tighten the oil filter two full turns (or to specified torque) withthe special tool.NOTE:To tighten properly the oil filter, use the special tool. Nevertighten the oil filter by hand only. Oil filter: 20 N·m (2.0 kgf-m)• Add new engine oil and check the oil level is as described inthe engine oil replacement procedure. NECESSARY AMOUNT OF ENGINE OIL:Oil change: 3.2 LOil and filter change : 3.6 LEngine overhaul : 3.9 LONLY USE A GENUINE SUZUKI MOTORCYCLE OILFILTER.Other manufacturer’s oil filters may differ in threadspecifications (thread diameter and pitch), filteringperformance and durability which may lead to enginedamage or oil leaks. Also, do not use a genuine Suzukiautomobile oil filter on this motorcycle.FUEL LINEInspect initially 6 000 km (12 months).• Lift and support the fuel tank. (5-3)• Inspect the fuel feed hose 1 for damage and fuel leakage. Ifany defects are found, the fuel feed hose must be replaced.