general information - Martin Nez

ENGINE 3-13• Replace the exhaust pipe gaskets and muffler connectorswith new ones.NOTE:Be sure to face the tabs A on the exhaust pipe gaskets 1 to theengine side when installing them.• Tighten the exhaust pipe bolts, muffler mounting bolts andmuffler connecting bolts to the specified torque. Exhaust pipe bolt: 23 N·m (2.3 kgf-m)Muffler mounting bolt: 23 N·m (2.3 kgf-m)Muffler connecting bolt: 23 N·m (2.3 kgf-m)• Install the HO2 sensor 2. HO2 sensor: 48 N·m (4.8 kgf-m)• Perform service and adjustment in the following items.* Engine oil (2-13)* Engine coolant (2-17)* Throttle cable play (2-15)*Clutch (2-16)* Idling adjustment (2-15)* Throttle valve synchronization (5-24)* Drive chain slack (2-20)* Wiring harness, cables and hoses (10-17 to -23)