10.07.2015 Views

general information - Martin Nez

general information - Martin Nez

general information - Martin Nez

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

COOLING AND LUBRICATION SYSTEM 7-17LUBRICATION SYSTEMOIL COOLERINSPECTIONInspect the oil cooler and oil cooler water hoses for engine oilleakage and engine coolant leakage.Replace any defective parts if necessary.REMOVAL• Drain engine oil. (2-13)• Drain engine coolant. (2-17)• Disconnect the oil cooler water hoses.• Remove the oil cooler 1.INSTALLATIONInstall the oil cooler in the reverse order of removal. Pay attentionto the following points:• Apply SUZUKI SUPER GREASE “A” to the O-ring. 99000-25010: SUZUKI SUPER GREASE “A”(or equivalent grease)Replace the O-ring with a new one.• Apply THREAD LOCK to the oil cooler mounting bolts andinstall the oil cooler 1 as shown. 99000-32050: THREAD LOCK “1342”• Tighten the oil cooler mounting bolts to the specified torque. Oil cooler mounting bolt: 10 N·m (1.0 kgf-m)• Connect the oil cooler water hoses.• Pour engine oil. (2-13)• Pour engine coolant and bleed air from the cooling circuit.(2-17 and -18)

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!