10.07.2015 Views

general information - Martin Nez

general information - Martin Nez

general information - Martin Nez

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

FI SYSTEM DIAGNOSIS 4-87SENSORSCMP SENSOR INSPECTIONThe camshaft position sensor is installed on the cylinder headcover. (4-32)CMP SENSOR REMOVAL AND INSTALLATION• Remove the air cleaner box. (5-13)• Remove the CMP sensor. (3-27)• Install the CMP sensor in the reverse order of removal.CKP SENSOR INSPECTIONThe crankshaft position sensor is installed on the right side ofmiddle crankcase. (4-34)CKP SENSOR REMOVAL AND INSTALLATION• Remove the starter clutch cover. (3-21)• Install the starter clutch cover in the reverse order of removal.IAP SENSOR INSPECTIONThe intake air pressure sensor is installed at the rear side of theair cleaner box. (4-36)IAP SENSOR REMOVAL AND INSTALLATION• Lift and support the fuel tank. (5-3)• Remove the IAP sensor from the air cleaner box.• Install the IAP sensor in the reverse order of removal.TP SENSOR INSPECTIONThe throttle position sensor is installed at the right side of theNo. 4 throttle body. (4-42)TP SENSOR REMOVAL AND INSTALLATION• Remove the air cleaner box (5-13) and lift up the throttlebody.• Remove the TP sensor. (5-15)• Install the TP sensor. (5-17)TP SENSOR ADJUSTMENT• Adjust the TP sensor. (4-19)

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!