general information - Martin Nez

ENGINE 3-43WATER PUMPDISASSEMBLY/INSPECTION (7-12)GEARSHIFT SYSTEMGEARSHIFT SHAFT/GEARSHIFT ARM DISASSEMBLY• Remove the following parts from the gearshift shaft/gearshiftarm.1 Washer 4 Gearshift cam drive plate2 Snap ring 5 Plate return spring3 Gearshift shaft return springGEARSHIFT SHAFT/GEARSHIFT ARM INSPECTION• Inspect the gearshift shaft/gearshift arm for wear or bend.• Inspect the return springs for damage or fatigue.• Replace the arm or spring if there is anything unusual.GEARSHIFT SHAFT/GEARSHIFT ARM REASSEMBLY• Install the following parts to the gearshift shaft/gearshift armas shown in the illustration.1 Washer 4 Gearshift cam drive plate2 Snap ring 5 Plate return spring3 Gearshift shaft return springNOTE:When installing the gearshift shaft return spring, position thestopper A of gearshift arm between the shaft return spring endsB.