general information - Martin Nez

3-96 ENGINE• Install the dowel pins 3.• Install the O-rings 4 to the camshaft journal holders.Replace the O-rings with new ones.• Install the camshaft journal holders.NOTE:* Each camshaft journal holder is identified with an embossedletter.“A”: No.1 and No.2 cylinders“B”: No.3 and No.4 cylinders* Check that embossed letter on each holder faces exhaustside.Damage to head or camshaft journal holder thrust surfacesmay result if the camshaft journal holders arenot drawn down evenly.• Install the can chain guide 5.• Fasten the camshaft journal holders evenly by tightening thecamshaft journal holder bolts lightly, in the ascending order ofnumbers.NOTE:* Fit the copper washer to the camshaft journal holder bolts F.* The ascending order of numbers are indicated on the camshaftjournal holders.“B”“A”