general information - Martin Nez

FUEL SYSTEM AND THROTTLE BODY 5-13AIR CLEANER BOX REMOVAL• Lift and support the fuel tank. (5-3)• Remove the air cleaner box mounting bolt 1.• Remove the IAP sensor 2 from the air cleaner box.• Loosen the throttle body clamp screws 3 (4 pcs) and lift upthe air cleaner box.• Disconnect the IAT sensor lead wire coupler 4.• Disconnect the PCV hose 5 and PAIR hose 6.• Remove the air cleaner box.THROTTLE BODY REMOVAL• Remove the air cleaner box. (above)• Disconnect the throttle cables from their drum.After disconnecting the throttle cables, do not snapthe throttle valve from full open to full close. It maycause damage to the throttle valve and throttle body.• Place a rag under the fuel feed hose and disconnect the fuelfeed hose from the fuel tank.