general information - Martin Nez

ENGINE 3-85• Install the starter clutch cover and tighten its bolt as shown.NOTE:Fit a new gasket washer to the starter clutch cover bolt C asshown.Use new gasket washer to prevent oil leakage. Starter clutch cover bolt: 10 N·m (1.0 kgf-m)• Install the starter idle gear No.1 shaft 6, thrust washer 7,bearing 8, starter idle gear No.1 9, washer 0, and concavedwasher A.• Install the dowel pins B and new gasket C.Use a new gasket to prevent oil leakage.• Install the starter idle gear cover and tighten its bolts to thespecified torque. Starter idle gear cover bolt: 10 N·m (1.0 kgf-m)NOTE:Fit the gasket washer to the bolt D.GEARSHIFT SYSTEM• Install the gearshift cam stopper 1, its bolt 2, washer 3 andreturn spring 4.NOTE:Apply a small quantity of THREAD LOCK to the gearshift camstopper bolt 2 and tighten it to the specified torque. 99000-32050: THREAD LOCK “1342” Gearshift cam stopper bolt: 10 N·m (1.0 kgf-m)