Download complete manual - pdf - Xtreme Manufacturing

EngineXR620/621/842/1045/1245/1254/1267/1534/2050/3034DO NOT leave coolant out where children or pets can get to it. It has a sweet smellbut is very toxic.INITIAL SET-UP1. Park forklift on level surface.2. Set Travel Select lever to NEUTRAL (N).3. Set Parking Brake switch to ON.4. Retract boom and lower carriage. Allow sufficient space to open forklift covers.5. Set Ignition switch to OFF.6. Attach danger tags to steering wheel and ignition key. Refer to para. 2-5, for lockout-tagoutprocedure.DRAINDO NOT drain the coolant while the engine is still hot and the system is underpressure. Dangerous hot coolant can be discharged.1. Open engine and radiator covers (Figure 1-2).2. Place cloth over radiator vent valve. Open vent.3. Remove radiator cap.4. Remove coolant recovery tank cap.5. Place container beneath radiator pet cock (Figure 5-11).6. Open radiator pet cock and allow coolant to drain into container.7. Place container beneath cylinder block drain plug (Figure 5-12).8. Remove cylinder block drain plug. Ensure that drain hole is not restricted. Allow coolant to drain intocontainer.9. After radiator and engine block have drained, properly dispose of coolant.10. Flush system with clean water.11. Re-install cylinder block drain plug and torque to 30 ft-lbs.12. Close radiator pet cock.Service Manual Rev 01 – 05/10 5-21P/N 24933-000