Download complete manual - pdf - Xtreme Manufacturing

Boom & AttachmentsXR620/621/842/1045/1245/1254/1267/1534/2050/303410-4 LUBRICATE BOOM EXTEND CHAINEVERY 1,000 HOURS OFOPERATIONPerform the following procedure to lubricate the boom extend chain:PersonnelSpecial tools and equipment– TASK REQUIREMENTS –One mechanicSafety glassesGloves (Viton)Parts and consumable materials Danger tags (2)Zep 45 penetrating lubricant or,LPS 3® Heavy-Duty Inhibitor or,Lubriplate Chain & Cable FluidBe very careful when working near moving boom parts and the chain. Seriousinjuries may result when fingers or loose clothing get caught in moving chain.INITIAL SET-UP1. Park forklift on level surface.2. Set Travel Select lever to NEUTRAL (N).3. Set Parking Brake switch to ON.4. Raise boom to horizontal (level) position.5. Fully extend boom until extend chain is taut.6. Set Ignition switch to OFF.7. Attach danger tags to steering wheel and ignition key. Refer to para. 2-5, for lockout-tagoutprocedure.LUBRICATE CHAINS1. Spray entire length of extend chain with lubricant. (See Figure 10-2.)2. Clean spilled lubricant, dirt, etc. from painted surfaces of forklift.Service Manual Rev 01 – 05/10 10-6P/N 24933-000