Download complete manual - pdf - Xtreme Manufacturing

EngineXR620/621/842/1045/1245/1254/1267/1534/2050/30345-14 CHECK AIR FILTERAFTER EVERY 8 HOURSOF OPERATION AND 250HOURS OF OPERATIONNOTE: The air filter should be checked after every 8 hours of operation only duringextremely dusty conditions. Normal inspection interval is 250 hours.Perform the following procedure to check the engine air filter:PersonnelSpecial tools and equipment– TASK REQUIREMENTS –One mechanicSafety glassesParts and consumable materials Danger tags (2)Use caution when replacing the air filters. The engine is highly vulnerable toabrasive dust contaminants during the servicing process when the filters areremoved from the housing.NOTE: The least efficient time in the life of an air filter element is when it is new. Filterelements increase in efficiency as dust builds up on the media. The filters should only bechanged when the dust build-up is beginning to restrict engine air intake.INITIAL SET-UP1. Park forklift on level surface.2. Set Travel Select lever to NEUTRAL (N).3. Set Parking Brake switch to ON.4. Retract boom and lower carriage. Allow sufficient space to open forklift covers.5. Set Ignition switch to OFF.6. Attach danger tags to steering wheel and ignition key. Refer to para. 2-5, for lockout-tagoutprocedure.INSPECT FILTER1. Open engine cover (Figure 1-2).2. Loosen thumb screw on clamp (Figure 5-5).3. Remove dust cup from air filter body.4. Remove main and safety filter elements from filter body.Service Manual Rev 01 – 05/10 5-24P/N 24933-000