Download complete manual - pdf - Xtreme Manufacturing

Maintenance & Operation SafetyXR620/621/842/1045/1245/1254/1267/1534/2050/3034• Perform a pre-operation inspection and functional tests at the beginning of eachwork shift. Perform the pre-operation inspection of the forklift first. DO NOTperform the pre-operation inspection with the engine running or hot. Contactwith moving or heated parts can cause injury or death.• Perform the pre-operation inspection and functional tests in an open area.Inspections and functional tests may require assistance. Keep the assistantvisible and a safe distance from the forklift to prevent injury or death.• Remove forklift from service and comply with the lockout/tagout procedure(para. 2-5) if anything is found to be in need of repair or maintenance, or isdefective, or is unsafe in any way.The safety, efficiency, and service life of your forklift will be increased by performing functional tests at thebeginning of each shift. If any of the items in the functional tests are not operating properly or within settolerances, stop the forklift, follow proper shut-down procedures, tag the vehicle with “DO NOTOPERATE” tags, and have a qualified mechanic service or repair the forklift BEFORE placing it intoservice again.2-14 SAFE OPERATION CHECKLIST Wear the seat belts at all times. Adjust the seat for optimum reach and comfort. Adjust the mirrors to provide optimum visibility. Clean mirrors if dirty. Wear all required personal protective equipment. Operate the forklift only while securely seated in the operator's seat. Never allow riders on the forklift. Clear all people and obstacles from the work area. Keep clear of overhead power lines. Allow a proper warm-up time and wait for the gauges to register properly. Verify the operation of all controls and functions. Position the forklift to allow good visibility of the work area.Service Manual Rev 01 – 05/10 2-12P/N 24933-000