Download complete manual - pdf - Xtreme Manufacturing

Maintenance & Operation SafetyXR620/621/842/1045/1245/1254/1267/1534/2050/3034• Failure to follow proper safety procedures when lifting, lowering, and travelingwith a load can cause property damage, injury, or death.• DO NOT exceed forklift capacity. The total rated capacity of the forks being usedmust equal or exceed forklift capacity. Forks can break or bend causing loss ofload and possible injury or death.• DO NOT exceed the manufacturer’s rated load for any auxiliary attachment. Anyattempt to lift or carry loads in excess of the manufacturer’s rated load maycause forklift tip over, loss of load, or structural damage which could result ininjury or death.• Failure to keep personnel clear of the load area while the load is being raised orlowered can result in injury or death. DO NOT lift, swing, or move a load overanyone or over a forklift cab.• Review the rated load capacity of each auxiliary attachment before performingany operation.• Use the correct load chart and NEVER exceed the maximum load height andreach for the load weight.• DO NOT exceed the manufacturer’s recommended load capacity.• DO NOT operate the forklift with an unsafe load distribution.• Adjust the load as necessary, especially for nonstandard loads.• Use caution when handling loose material that can fall into the cab.• Remove overhanging load materials, when possible, and watch for slidingmaterial.• DO NOT reach a load over posts or other objects that can enter the cab, iftipped.Service Manual Rev 01 – 05/10 2-15P/N 24933-000