Download complete manual - pdf - Xtreme Manufacturing

Wheels & TiresXR620/621/842/1045/1245/1254/1267/1534/2050/3034Section 7Wheels & Tires7-1 GENERAL MAINTENANCE SAFETYUse caution when performing maintenance on the forklift. Wear personal protectiveequipment when appropriate and use danger tags. Carefully follow themaintenance procedures provided in this chapter. Read the Material Safety DataSheets (MSDS) for solvents, cleaners, etc. Read and fully understand the safety informationprovided in Chapter 2 – Maintenance & Operation Safety, beforeperforming maintenance on the forklift.7-2 CHECK WHEEL LUG NUT TORQUEAFTER FIRST 50 HOURSOF OPERATIONPerform the following procedure to check the torque applied to the wheel lug nuts:PersonnelSpecial tools and equipment– TASK REQUIREMENTS –One mechanicTorque wrench30 mm socketParts and consumable materials Danger tags (2)INITIAL SET-UP1. Park forklift on level surface.2. Set Travel Select lever to NEUTRAL (N).3. Set Parking switch to ON.4. Retract boom and lower carriage. Allow sufficient space to open forklift covers.Service Manual Rev 01 – 05/10 7-1P/N 24933-000