Download complete manual - pdf - Xtreme Manufacturing

EngineXR620/621/842/1045/1245/1254/1267/1534/2050/3034Parts and consumable materials Danger tags (2)Clean, disposable clothMain air filter elementXtreme P/N 14362-010Safety air filter elementXtreme P/N 14362-011Use caution when replacing the air filters. The engine is highly vulnerable toabrasive dust contaminants during the servicing process when the filters areremoved from the housing.NOTE: The least efficient time in the life of an air filter element is when it is new. Filterelements increase in efficiency as dust builds up on the media. The filters should only bechanged when the dust build-up is beginning to restrict engine air intake.INITIAL SET-UP1. Park forklift on level surface.2. Set Travel Select lever to NEUTRAL (N).3. Set Parking Brake switch to ON.4. Retract boom and lower carriage. Allow sufficient space to open forklift covers.5. Set Ignition switch to OFF.6. Attach danger tags to steering wheel and ignition key. Refer to para. 2-5, for lockout-tagoutprocedure.REPLACE AIR FILTER1. Open engine cover (Figure 1-2).2. See Figure 5-5. Loosen thumb screw on dust cup clamp.3. Remove clamp.4. Remove dust cup.5. Inspect dust cup for cleanliness. If dirty, clean with clean, disposable cloth. Dampen cloth ifnecessary.6. Replace main and safety air filter elements.7. Position dust cup on air filter assembly body.8. Attach dust cup to air filter assembly body with clamp. Tighten thumb screw.9. Close engine cover.Service Manual Rev 01 – 05/10 5-23P/N 24933-000