Download complete manual - pdf - Xtreme Manufacturing

Transmission, Axles & DriveshaftsXR620/621/842/1045/1245/1254/1267/1534/2050/3034FILL1. Install drain plug and torque to 44 ft-lbs.2. Apply a thin film of oil on delivery filter seal. Install delivery filter on transmission and tighten handtight.3. Remove dipstick (DANA) or fill plug (CARRARO).4. Refill transmission with Dexron III transmission fluid (as noted in chart on page 6-6).5. Replace dipstick (DANA) or fill plug (CARRARO). Hand tighten fill plug, then tighten 1/2 turn further(CARRARO).6. Start engine and run until engine is warm.7. Set Travel Select lever to F (Forward). Alternately set Gear Select switch to 1st, 2nd, 3rd, and 4thgears.8. Set Travel Select lever to R (Reverse). Alternately set Gear Select switch to 1st, 2nd, 3rd, and 4thgears.9. Re-check transmission fluid level. Add fluid as required.Fill PortFilterFill PortFilterDrain plugDANA842 / 1267 / 2050 / 3034CARRARO1045 / 1245 / 1254 / 1534Drain plugFigure 6-3. Transmission Plugs and FiltersService Manual Rev 01 – 05/10 6-7P/N 24933-000