Download complete manual - pdf - Xtreme Manufacturing

EngineXR620/621/842/1045/1245/1254/1267/1534/2050/30343. Set Parking Brake switch to ON.4. Retract boom and lower carriage. Allow sufficient space to open forklift covers.5. Set Ignition switch to OFF.6. Attach danger tags to steering wheel and ignition key. Refer to para. 2-5, for lockout-tagoutprocedure.CHECK OIL LEVEL1. Open engine cover (Figure 1-2).2. Pull dipstick (Figure 5-1) from engine and wipe with clean cloth.3. Re-insert dipstick in engine and remove to check amount of oil in crankcase. If oil level is below uppernotch on dipstick, add oil to crankcase.ADD OIL1. Remove engine oil fill cap from valve cover (Figure 5-1).2. Using clean funnel, pour oil into valve cover opening.3. Use dipstick to recheck oil level.4. Repeat Steps 2 and 3 until oil level reaches second notch on dipstick.5. Install oil fill cap in valve cover.6. Close engine cover.Figure 5-1. Engine Oil Fill Cap and DipstickService Manual Rev 01 – 05/10 5-2P/N 24933-000