Download complete manual - pdf - Xtreme Manufacturing

EngineXR620/621/842/1045/1245/1254/1267/1534/2050/3034INITIAL SET-UP1. Park forklift on level surface.2. Set Travel Select lever to NEUTRAL (N).3. Set Parking Brake switch to ON.4. Retract boom and lower carriage. Allow sufficient space to open forklift covers.5. Set Ignition switch to OFF.6. Attach danger tags to steering wheel and ignition key. Refer to para. 2-5, for lockout-tagoutprocedure.INSPECTION1. Open engine cover (Figure 1-2).2. Inspect the following components and areas for evidence of oil, coolant, and fuel leaks:Some leaks can be repaired simply by tightening a loose screw or screws.However, note that the proper method for tightening the screws of a component,such as the oil pan, is with a torque wrench. Also note that the screws should betightened in a specific sequence to prevent warping the component. All leaksshould be troubleshot and repaired by a qualified mechanic.• Engine valve cover.• Engine head.• Engine oil pan.• Water pump.• Thermostat.• Turbocharger.• Fuel pump.Service Manual Rev 01 – 05/10 5-33P/N 24933-000