Download complete manual - pdf - Xtreme Manufacturing

EngineXR620/621/842/1045/1245/1254/1267/1534/2050/3034REPLACE CANISTER-TYPE OIL FILTERNOTE: The canister contains a valve and a special tube to ensure that engine oil doesnot drain from the filter when the oil is changed.1. See Figure 5-9. Position container below oil filter canister (2).2. Remove filter canister (2) with strap wrench. Ensure adapter is secure in filter head.3. Discard canister (2).4. Clean filter head (3).5. Fill canister with new oil.6. Lubricate top of new canister seal (1) with clean oil.7. Install new canister (2) and tighten by hand. DO NOT use strap wrench.8. Remove container and properly dispose of engine oil.9. Close engine cover.Figure 5-9. Canister-Type Oil FilterFILL CRANKCASE WITH OIL1. Ensure O-ring is not damaged. Install drain plug and O-ring. Torque plug to 25 ft-lbs.2. Add engine oil to crankcase until oil level reaches fill line on dipstick (2).Service Manual Rev 01 – 05/10 5-15P/N 24933-000