Download complete manual - pdf - Xtreme Manufacturing

Checkout ProceduresXR620/621/842/1045/1245/1254/1267/1534/2050/3034Figure 11-2. Frame Level IndicatorNOTE: The following tests should be conducted at one time and in sequence.TEST NO. 1The test verifies that the Service Brake activates the RAS (Locked Mode).TEST SETUP1. Set Parking Brake switch to OFF.2. Depress Service Brake pedal just enough to keep Rear Axle Locked indicator ON.3. Set Travel Select lever to Reverse (R) and 1st gear.4. Slowly depress Throttle to drive through service brakes sufficient distance to back off block wherefront left wheel is off ground.RESULTSThe rear axle remains locked with no oscillation and the left front tire remains airborne.TEST NO. 2This test verifies that setting the travel select lever to N activates RAS (Locked Mode).1. Keep Service Brake depressed and Parking Brake switch set to OFF.2. Set Travel Selector to NEUTRAL (N).3. Release Service Brake.Service Manual Rev 01 – 05/10 11-3P/N 24933-000