Download complete manual - pdf - Xtreme Manufacturing

Maintenance & Operation SafetyXR620/621/842/1045/1245/1254/1267/1534/2050/30342-10 ENGINE OPERATION AND MAINTENANCE• Do not add lubricating oil to the engine when it is running.• Do not make adjustments to the engine while it is running unless you have beencorrectly trained to make the adjustments. Use extreme care to prevent injury.• Do not operate the engine if a safety guard has been removed.• Do not remove the filler cap or any component of the cooling system while theengine is hot and while the coolant is under pressure. Dangerous hot coolantcan be discharged and cause severe burns.• Ensure that the engine does not run in a location where it can cause aconcentration of toxic emissions.• Operate the engine only when seated in the forklift operator's seat.• Keep away from moving parts during engine operation.• Only one person must control the engine.• Other persons must be kept at a safe distance while the engine is operating.• Some moving parts cannot be seen clearly while the engine runs. Exerciseextreme caution when placing head, hands, and arms in the enginecompartment.• The combustible material of some components of the engine (for examplecertain seals) can become extremely dangerous when burned. Never allow thisburnt material to come into contact with the skin or eyes.• Turbochargers operate at high speed and at high temperatures. Keep fingers,tools, and debris away from the inlet and outlet ports of the turbocharger andprevent contact with hot surfaces.• Do not wash an engine when it is running or is hot. If cold cleaning fluids areapplied to a hot engine, certain components on the engine could be damaged.• Use only genuine Perkins Engines Inc. parts. Using substitute parts can damagethe engine and may void the warranty. Contact Perkins at 1-888-PERK-ENG orwww.perkins.com.Service Manual Rev 01 – 05/10 2-10P/N 24933-000