Download complete manual - pdf - Xtreme Manufacturing

EngineXR620/621/842/1045/1245/1254/1267/1534/2050/30343. Using clean funnel, pour coolant into overflow tank until tank is approximately half full.ADD COOLANT TO RADIATOR AND OVERFLOW TANKNEVER open a radiator cap on a hot engine. The radiator is pressurized and thecoolant could spurt out and scald you1. Let engine cool down completely.2. Cover vent (Figure 5-3) with cloth. Turn vent to counter-clockwise (CCW) to release any pressurestored in radiator.3. Remove radiator cap.4. Using clean funnel, pour coolant into radiator until radiator core is completely covered.5. Remove cloth from vent and turn clockwise (CW) until closed. Replace radiator cap.6. Open overflow tank cap.7. Using clean funnel, pour coolant into overflow tank until tank is approximately half full. Close cap.8. Start engine and operate until engine reaches normal operating temperature.9. Check coolant level in overflow tank. Add coolant as required.10. Close engine cover.Figure 5-2. Coolant Level IndicatorService Manual Rev 01 – 05/10 5-4P/N 24933-000