Download complete manual - pdf - Xtreme Manufacturing

Wheels & TiresXR620/621/842/1045/1245/1254/1267/1534/2050/3034Support the weight of the forklift using a suitable lift, or jack(s) and jack standswith the appropriate load capacity. Forklift operating weights are listed below.Table 7-1. Forklift Operating WeightsForklift ModelOperating Weight (Lbs.)XR620/621 12,700XR842 26,850XR1045 27,130XR1245 32,930XR1254 35,700XR1267 46,300XR1534 29,000XR2050 48,750XR3034 47,850INITIAL SET-UP1. Park forklift on level surface.2. Set Travel Select lever to NEUTRAL (N).3. Set Parking Brake switch to ON.4. Retract boom and lower carriage. Allow sufficient space to open forklift covers.5. Set Ignition switch to OFF.6. Attach danger tags to steering wheel and ignition key. Refer to para. 2-5, for lockout-tagoutprocedure.REMOVAL1. Raise forklift on lift or with jack(s) and support weight with jack stands.2. Remove lug nuts with impact wrench with 30 mm socket.3. Remove wheel/tire assembly from wheel-end.INSTALLATION1. Clean wheel-end studs if dirty or corroded.2. Clean area around wheel bolt holes if dirty or corroded.Service Manual Rev 01 – 05/10 7-5P/N 24933-000