Download complete manual - pdf - Xtreme Manufacturing

EngineXR620/621/842/1045/1245/1254/1267/1534/2050/3034Figure 5-3. Radiator5-4 CHECK FOR OIL AND COOLANT LEAKSEVERY 8 HOURS OFOPERATIONPerform the following procedure to check the engine for oil and coolant leaks:PersonnelSpecial tools and equipment– TASK REQUIREMENTS –One mechanicSafety glassesParts and consumable materials Danger tags (2)Clean clothINITIAL SET-UP1. Park forklift on level surface.2. Set Travel Select lever to NEUTRAL (N).3. Set Parking Brake switch to ON.4. Retract boom and lower carriage. Allow sufficient space to open forklift covers.5. Set Ignition switch to OFF.6. Attach danger tags to steering wheel and ignition key. Refer to para. 2-5, for lockout-tagoutprocedure.Service Manual Rev 01 – 05/10 5-5P/N 24933-000