DELOREAN WORKSHOP MANUAL - Free

i
GENERAL SAFETY HINTS
1. Use the correct spanner or driver for all fastening. When fitting
new fastenings ensure the thread size is correct. Metric
fastenings are predominantly, but not exclusively used. —
2. Never walk under a car unless it is properly supported by stands.
3. Make sure jacks or stands are positioned safely and where they
will not cause damage to the car.
4. Always disconnect the battery before working on electrical
components or wiring.
5. When working in the engine compartment or under the car make —
sure the engine cannot be started accidentally.
6. Keep hands and clothing clear of electrically operated fans even —
when the ignition is OFF.
7. Take care not to inhale dust from brake pads — it contains
asbestos which is a health hazard. I
8. Treat gasoline (petrol) with great respect — avoid any sort of
spark or flame. Do not start syphoning by mouth; drain fuel into
a closed container.
LEGISLATION REQUIREMENTS
Most countries have stringent regulations governing the design and
manufacture of cars, aimed mainly at maintaining standards of
safety, noise and pollution. De Lorean cars conform to the
homologation specifications required in the countries to which they
are distributed.
Alterations to the car after purchase — by changing settings or
adjustments, by addition of unapproved parts, or the fitting of
unsuitable replacement parts — can result in deviation from the
agreed specification. Such deviations can have legal consequences
and you are therefore advised not to make alterations and to ensure
that replacement parts are to the original specification.
SPECIFICATION CHANGES
The Company reserves the right to change the specification of the
car from time to time without notice.
This is required in order to achieve the Company's objective for
constant improvement. Before carrying out any repair refer to latest
issue of the Service Bulletins, which are designed to advise any _.
changes in specification or repair technique.
•
1
1
1
1
1
1