NUREG-1537, Part 2 - NRC

1 THE FACILITY
Chapter 1 of the safety analysis report (SAR) is an overview or an executive
summary of topics covered in detail in other chapters. The applicant should
include a general introduction to the SAR and the non-power reactor facility. The
applicant should state the purpose of the SAR and briefly describe the application.
1.1 Introduction
Areas of Rview
In this very brief introduction to the applicant and the facility, areas of review
should include the following:
* 'identification anid description of ihe applicant
* -purpose and intended use of the reactor facility
* geographical location
* type and power level of the reactor ' '
* inherent or passive safety features
* unique design features, such as a pressurized primary coolant system or
unique fuel design, which would be notable for a non-power reactor
licensed by the U.S. Nuclear Regulatory Commission (NRC)
Acceptance Crteria
Acceptance criteria for the information in this section should include the following:
* The purpose of the SAR should be clearly stated.
* The applicant should be identified.
* The location, purpose, and use of the facility should be briefly described.
* The basic characteristics of the facility that affect licensing considerations
should be briefly discussed.
* lThe design or location features included to address basic safety concerns
should be outlined.
1-1
REV 0,2196 0, 2-% - - - - I -I -STANDARD REVIEW PLAN