NUREG-1537, Part 2 - NRC

CHAPnth 3
and whose electromechanical systems and components have functioned as
designed).
Review Procedures
The reviewer should review this and other applicable SAR sections to verify that
the electromechanical systems and components that are required to ensure safe
reactor conditions are considered and their operating conditions are analyzed to
ensure function. The design bases of applicable technical specifications that ensure
operability should be evaluated.
Evalualion Findings
This section of the SAR should contain sufficient information to support the
following types of conclusions, which will be included in the staffs safety
evaluation report:
* The design bases of the electromechanical systems and components give
reasonable assurance that the facility systems and components will function
as designed to ensure safe operation and safe shutdown of the reactor.
* The surveillance activities proposed in the technical specifications
acceptably ensure that the safety-related functions of the electromechanical
systems and components will be operable and the health and safety of the
public will be protected.
3.6 Bibliography
American National Standards Institute, ANSI N323, 'Radiation Protection
Instrumentation Test and Calibration," 1978.
American National Standards Institute/American Nuclear Society,
ANSI/ANS 15.2, "Quality Control for Plate-Type Uranium-Aluminum Fuel
Elements," 1990.
American National Standards Institute/American Nuclear Society,
ANSI/ANS 15.7, 'Research Reactor Site Evaluation," 1977.
American National Standards Institute/American Nuclear Society,
ANSIIANS 15.8, "Quality Assurance Program Requirements for Research
Reactors," 1986.
American National Standards Institute/American Nuclear Society,
ANSI/ANS 15.11, "Radiological Controls at Research Reactors," 1993.
NTJREG-l537,PMT2 3-8 REv 0,2196
NUREG-1537, PART 2 3-8 REV 0, 2196
- X -