25.06.2013 Views

NUREG-1537, Part 2 - NRC

NUREG-1537, Part 2 - NRC

NUREG-1537, Part 2 - NRC

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

CwATER 14<br />

Acceptance Criteria<br />

Acceptance criteria for the technical specifications for non-power reactors should<br />

include the following:<br />

* Technical specifications shall satisfy 10 CFR 50.34 and 10 CFR 50.36 if<br />

they adequately address the issues and parameters of ANSI/ANS 15.1 as<br />

supplemented in Appendix 14.1 of the format and content guide for nonpower<br />

reactors.<br />

* Technical specifications should be standardized and consistent in format<br />

with the guidance in Appendix 14.1.<br />

* AlU conditions that provide reasonable assurance that the facility will<br />

function as analyzed in the SAR should be in the technical specifications.<br />

* In conjunction with the findings in other chapters of the staff's safety<br />

evaluation report, the limits for the facility design, construction, and<br />

operation should provide reasonable assurance that the facility can be<br />

operated without endangering the environment or the health and safety of<br />

the public and the facility staff<br />

Review Procedures<br />

The reviewer should compare the proposed technical specifications with<br />

ANSI/ANS 15.1, as supplemented in the format and content guide, with previously<br />

accepted technical specifications of similar design, operating characteristics, site<br />

and environmental conditions, and use, and with the facility SAR<br />

The technical specifications and basis should be determined from the analysis in the<br />

SAR The reviewer should confirm that the technical specifications are complete<br />

and follow the correct format. This review is part of the process to review and<br />

approve the technical specifications. The reviewer should confirm that each<br />

technical specification is supported by appropriate reference to SAR analysis and<br />

statements. <strong>NRC</strong> review of those SAR chapters should support the finding that<br />

each of the technical specifications is acceptable to <strong>NRC</strong>.<br />

Evaluation Findings<br />

This section of the SAR should contain sufficient information to support the<br />

following type of conclusion, which will be included in the staffs safety evaluation<br />

report:<br />

<strong>NUREG</strong>-I 537. PART 2 14-2 REV 0,2/%<br />

<strong>NUREG</strong>-1 537, PART 2 14-2 REV 0, 2/96<br />

'So

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!