NUREG-1537, Part 2 - NRC

Evasion Findings
- DESIGN OF STRucnrRES, SYSTEM, AND COPONENTS
This section of the SAR should contain sufficient information to support the
following types of conclusions, which will be included in the staff's safety
evaluation report:
* The'design to protect against seismic damage provides reasonable.
assrance'that the facility structures, systems, and components will perform
the necessary safety functions'described and analyzed in the SARP
* The design to protect against seismic damage provides reasonable
assurance that the consequences of credible seismic events at the facility
are considered (or bounded) by the results of the Chapter 13 accident
' analyses;' ensurng acceptable protection ofthe public health and safety.
* The surveillance activities proposed in the technical specifications provide
reasonable assurance that the'safety-related functions of the structures,
systems, and components that are required to respond to or mitigate the
consequences of seismic damage tothe facility will be maintained.
3.5 Systems and Components
Areas of Review -
Areas of review should include the design bases for the electromechanical systems
and components that are required to function and are described in detail in this or
other SAR sections.
Acceptance Criteria'
The acceptance criteria for the information on systems and components include the
following: . -.. .
* The design criteria should include consideration of the conditions required
of the electromechanical systems and components to ensure safe reactor
operation, including response to transient and potential accident conditions
analyzed in the SAR. (Examples of conditions that are important forthe '
electromechanical systems and components are dynamic and static loads,
number of cycles, vibration, wear, friction,' strength of materials, and.,.
effects of the operating environment, including radiation and temperature.)
* Comparisons with similar applicable facility designs may be included (e.g.,
a reactor of similar design that has operated through its licensed life cycle
REV. 0, 2196 3-7 STANDARD REVIEW PLAN